Used Tenon Cutters
Schneider
(left):
Timbers of any length are rolled into cutting position, angles can
be set: For cutting tenons in one pass on beams to 240 mm wide (= 9.5")
cut height to 450 mm (= 17.5").
Rex ZA 800 (below)
A rugged table, that can be angled, holds the timber in place. With
this machine an end-cut can be sawn, then moved through large diameter
double blades; a complete tenon is cut in one pass.
Krusi
Tenon Cutter ZA 66 P
